S3 CHIP VGA:(765,775,785,325,375,385,357,260,365,391,362,368,395,397...)
Application and driver installation for Windows 3.1 (357,260,365,391, must install manually)
 Change to CD ROM drive, and change sub-directory (S3\765\WIN31) run Install.
 Than you can see as following screen.
 Example :      E:\>CD\S3\765\WIN31   [Enter]  
                E:\CD\S3\765\WIN31* INSTALL E: C:  [Enter]  
     ("E:" -> your CD Drive,  "765" -> VGA type,  "C:" -> your HDD Drive)

 1. After some messages and operations, you can see the screen as following:
		Trio765 Device Driver Installation
	 Install Windows 3.1 Driver
	 Install Chinese Windows 3.1 Driver
	 Install Japanese Windows 3.1 Driver
	 Install Korean Windows 3.1 Driver
	 Install Thai Windows 3.1 Driver
	 Exit
 2. You can use the Keyboard or Mouse to select the item you want.
 3. May be you should key in the Path where the system exist.
 4. Exit.

Application and driver installation for Windows 95/98
 The Windows setup program installs and modifies all of the necessary files.
 Follow these steps to install the Windows 95 driver.
 1.Insert the "Window 95 Driver" Installation Diskette or DISC (CD Title Driver).
 2.Select "Control Panel" from the "My Computer" group.
 3.Select the "Display" icon
 4.Double-click on the "Display" icon in the Setting -> Control Panel folder. You
   can also click the right mouse button anywhere on the desktop and select the 
   Properties option form the pop-out menu.
 5.Click the "Settings" tab.
 6.Click the "Change Display Type..." button.
 7.Click the "Have Disk" button.
 8.Change directories and Select S3.INF / S3TrioV2.INF / S3ViRGE(DX/GX).INF.
   Diskette is A: or B:\WIN95 , Disc (CD Title) is E:\Drivers\S3\765\WIN95 
   ("A:" or "B:"* Diskette Drive  "E:"*CD Drive  "765"*VGA type)
 9.Select S3 Trio64 V+ (V2) PCI or S3 ViRGE (DX/GX) PCI driver form the list and
   click the OK button. If a message stating that one or more driver files is older
   than the files on the system respond YES to overwrite the files.
 10.Click the Close button and Apply button, and restart your computer.

Application and driver installation for Windows NT 3.51/4.0
 The following steps describe how to install WIN NT 3.51 and 4.0 display drivers
 1.Select Control Panel from the Main group.
 2.Select the Display icon.
 3.Select Change Display Type.
 4.Select Change from the Adapter Type area.
 5.Select Other.
 6.Place the WINDOWS NT Installation Disk or Disc (CD Title) into Driver. Click OK. 
 7.Select Install and click "YES" when the Installing Driver dialog box appears.
 8.When the WINDOWS NT Setup dialog box appears select driver A or CD ROM, and 
   click "Continue".
 A message appears stating that drivers were successfully installed. Click OK. Another
 message appears stating that the driver could not be restarted dynamically. Restart
 WINDOWS NT to run the new driver. Click OK.

Application and driver installation for OS/2
 Installation Instructions
 1. Open an OS/2 command prompt (windowed or full screen).
 2. Insert the OS/2 Installation Diskette into the floppy drive or Disc into to CD ROM.
 3. Change to the floppy drive (A: or B:) or Disc (CD ROM) into which you have inserted
    the driver diskette or CD ROM. Verify that the diskette (Disc) is labeled "S3 DRVS".
    If it is not so labeled , then type label "S3 DRVS".
 4. Type "S3INST  A: C:" or "S3INST E: C:" and press "Enter"("A" is the floppy driver,
    "E" is the CD ROM Driver, "C" is the HDD driver on which OS/2. 2.1 or OS/2 3.0 WARP
    is installed).
 5. When prompted, exit the OS/2 command prompt, remove the floppy disk , and shut down
    and reboot the system.
 6. Make sure you have all open data files saved before continuing the S3 driver
    installation.
 7. Make sure Win-OS/2 session and all Seamless Windows applications are closed
    (Seamless applications as Windows applications that run on top of the PM Desktop).
 8. Double click on the "OS/2 System" icon.
 9. Double click on the "System Setup" icon.
10. Double click on the "Display Driver Install" icon.
11. When prompted by the Display Driver install dialog, select Primary Display and then
    click the OK button.
12. Select the "32 Bit S3 Display Driver" option form the Primary Display and then
    click the OK button.
13. Select the appropriate option form the Monitor Configuration/Selection Utility
    dialing, and click the OK button.
14. The Source Directory dialog will be displayed. Make sure the source directory is
    set to the location form which you are installing and select install.
15. The installation Program may pause and display prompts to overwrite certain files.
    Please answer YES for each file.
16. You will be given a message stating that you  Must shut down and restart your
    system for the changes to take effect "Click" the OK button.
17. Remove the driver diskette form the floppy drive and Shut down and reboot.